World-Class Processing
Our state-of-the-art, 102,000 sf aerostructures processing facility is ISO 14001 and NADCAP certified. It incorporates the most advanced equipment to deliver a full range of highly sophisticated processing solutions.
Service advantages include: an ERP portal and bar coding system for customer-centric planning, tracking and management; masking services and 3-D modeling; non-destructive immersion (dip line) & electrostatic testing; blasting & stripping; paint application; and wastewater minimization (zero liquid discharge) & recycling.
Aluminum Processing Line
• 20 Tanks (30’ x 12’ x 36”)
• Max Part Envelope (28’ x 10’ x 30”)
Penetrant Inspection
• 7 Tanks (30’ x 12’ x 36”)
• 2 Lines (small & large batch)
Prime & Top Coat
• Prime Line (120’L x 12’W)
• Top Coat Booth (40’L x 12’W)
-
Certifications
-
Northrop Grumman
- MIL-DTL-5541 – Chemical Conversion Coatings on Aluminum and Aluminum Alloys
- MIL-DTL-18264 – Finishes, Organic, Weapons Systems, Application and Control Of
- MIL-A-8625 – Anodic Coatings for Aluminum Alloys
- MIL-PRF-85285 – Coating: Polyurethane, Aircraft and Support Equipment
- MIL-PRF-85582 – Primer Coatings: Epoxy, High-Solids
- MIL-STD-1907 – Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for Materials, Parts and Weldments
- AMS-C-27725 – Coating, Corrosion Preventative, for Aircraft Integral Fuel Tanks for use to 250°F
- ASTM E 1417 – Standard Practice for Liquid Penetrant Testing
- LMA-PC201 – Fluorescent Penetrant Inspection of Metallic Parts & Materials – F-35. Includes Fracture Critical Parts
- LMA-PG201 – Pre-Penetrant Etch
- LMA PJ264 – Application and Control of Organic Finishes
- PJ-264 – Prime, Top Coat, Fuel Tank
- 2ZZP00001 – Finish Specifications for F-35 Weapon System
Boeing
- BAC 5019 – Chromic Acid Anodizing Class 1 and 3, and 5
- BAC 5034 – Masking
- BAC 5423 – Fluorescent Penetrant Inspection
- BAC 5632 – Boric Acid – Sulfuric Acid Anodizing Class 1 and 5
- BAC 5710 – Specialty Coatings
- BAC 5719 – Chemical Conversion Coatings for Aluminum
- BAC 5725 – Paint Stripping
- BAC 5736 – Prime
- BAC 5748 – Abrasive blast
- BAC 5786 – Etch (Aluminum)
- BAC 5793 – Fuel tank
- BAC 5845 – Topcoat
- BSS 7039 – Liquid Penetrant Inspection
- MIL-C-5541 – Chemical Conversion Coatings on Aluminum and Aluminum Alloys
- MIL-A-8625 – Type I, IC, and IIB
Boeing Military
- PS 12050.1 – Pickling Aluminum Alloys
- PS 13201 – Anodizing Aluminum Alloys
- PS 13204 – Conversion Coating, Brush and Spray
- PS 13209 – Coating, Multicolored Chemical Conversion of Aluminum Alloys by the Immersion Process
- PS 13525 – Polyurethane corrosion resistant coating: Spray application of
- PS 13646.1 – Finishes for Missiles and Associated Equipment
- PS 21202 – Penetrant inspection
HondaJet
- HJPS-6006 – Integral Fuel Tank Coating Application
- HJPS-6007 – Epoxy Primer Application
- HJPS-6011 – Chemical Conversion Coating of Aluminum Alloys
- HJPS-6012 – Chomic Acid Anodize
- HJPS-6019 – Cleaning of Aluminum Alloys
- HJPS-6020 – Solvent Wipe
- HJPS-6025 – Application of Polyurethane Topcoat
- HJPS-6035 – boring Sulfuric Anodize
- HJPS-T006 – Fluorescent Penetrant Inspection
Gulfstream
- GAMPS-1105 – Identification marking of fabricated metallic parts and assemblies
- GAMPS-3102 – Integral fuel tank coating, AMS-C-277725, application of
- GAMPS-3103 – Primer coating, epoxy, preparation and application of (including Gulfstream finsish #2012)
- GAMPS-3116 – Primer epoxy, preparation and application of
- GAMPS-3205 – Coating: gloss epoxy finish, application of (includes finish #2013)
- GAMPS-3216 – Epoxy topcoat, high solids, phosphate ester fluid resistant, preparation and application of
- GAMPS-3303 – Abrasion resistant (anti-chafe) coating, application of
- GAMPS-3306 – Solid dry film lubricant, application of
- GAMPS-6113 – Preparations of surfaces by abrasive methods
- GAMPS-6201 – Chemical conversion coating on aluminum and aluminum alloys
- AMS-C-27725 – Coating corrosion preventative for aircraft integral fuel tanks for use to 250°F
- ASTM-E-1417 – Standard practice for liquid penetrant testing
Lockheed Martin
- LMA-PJ264 – Application and control of organic finishes
- MIL-DTL-18264 – Finishes, organic, weapons systems, application and control of
- MIL-DTL-5541 – Chemical Conversion coatings on aluminum and aluminum alloys
- MIL-A-8625 – Anodic coatings for aluminum and aluminum alloys
- MIL-PRF-23377 – Primer coatings: Epoxy, high-solids
- MIL-PRF-32033 – Lubricating oil, general purpose, preservative (water-displacing, low temperature)
- MIL-PRF-85285 – Coating: polyurethane, aircraft and support equipment
- MIL-PRF-85582 – Primer coatings: Epoxy, waterborne
- MIL-STD-1907 – Inspection, liquid penetrant and magnetic particle, soundness requirements for materials, parts, and weldments
- 2ZZP00001 – Finish specification for F-35 weapon system coating, corrosion preventative, for aircraft integral fuel tanks for use to 250°F
- ASTM-E-1417 – Standard practice for liquid penetrant testing fluorescent penetrant inspectin of metallic parts and materials-F-35
CESSNA
- CSFS-020 – Chromic acid anodize – Type 1 & Type II
- CSFS-027 – Chemical film, chromate
- CSFS-035 – Chemical cleaning/metals
- CSFS-039 – Solvent cleaning
- CSFS-044 – Alkaline cleaning of metals
- CSFS-045 – Etch & Deox of aluminum
- CSFS-084 – Coatings, VOC compliant, APPL
- CSTI-002 – Penetrant inspection